PU-4H4HBTPL-4K-KIT
CYP/// PU-4H4HBTPL-4K är det självklara valet i ett fullfjädrat multiroom-system baserat på HDMI om man vill ha 4K stöd. Den är HDBaseT Lite vilket innebär att den hamnar i ett attraktivt prisläge, men klarar ändå 60 meters räckvidd i en vanlig Cat6-kabel.
Med 4 HDMI in och 4 HDBaseT Lite ut klarar denna här att tillfredsställa de mest grundläggande behoven för ett litet hus eller lite större lägenhet. En annan fördel med denna matrisen är att den levererar Power over Cable ( PoC ) vilket innebär att man inte behöver strömförsörja mottagarna, allt detta sköts genom matrisen.
Med i paketet finns även 4 st PU-515PL-RX mottagare.
?The 4K2K 4 by 4 HDMI Matrix over CAT5e/6/7 supports the transmission of video (resolutions up to 4K2K Full HD), multi-channel digital audio from 4 HDMI sources to 4 outputs over a single CAT5e/6/7 cable (up to 60m) for each output. It supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3D TV and 3D source.
This matrix features control via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports UART RS232 pass-through.
The PU-4H4HBTPL-4K is designed to be used with the PU-515PL-RXs that is supplied in the kit.
HDMI, HDCP1.1 and DVI compliant
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
Supports uncompressed video/audio up to 10.2Gbps
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
Supports 1080p distances up to 60 meters through CAT5e/6/7 cables
Supports 3D signal display dependent upon the output display EDID settings
Supports HDMI input up to 15 meters at 8-bit resolution or 10 meters at 12-bit resolution
Supports bi-directional IR from input and output locations
Supports RS-232, remote control, on-panel control and IP Control (Telnet & Web GUI)
1U size design
Supports external and internal EDID settings
Supports RS-232 for Matrix Control, plus RS-232 pass-through: Third-party devices can be controlled in each zone via RS-232 from the head-end to the receiver, or head-end devices can be controlled via RS-232 from any receiver in any zone
Supports 4K/2K & 4K UHD - CAT5e/6 = 35m & CAT6a/7 = 40m
Inputs:
4x HDMI [4x HDMI Uncompressed AV and Data]
5x 3.5mm Stereo mini-jack [5x Infra Red Receiver]
1x RJ45 [1x LAN Serving / IP Control]
1x 9pin Dsub [1x RS-232 Data]
1x USB Mini B [1x Service Port Propriety Data]
Outputs:
4x RJ45 [4x HDBaseT Lite HDMI & Propriety Data]
5x 3.5mm Stereo mini-jack [5x Infra Red Emitter]
PSU: 24V/3.75A
Dimensions: 440mm [W] x 250mm [D] x 45mm [H]
Net Weight: 3340g
Gross Weight:5660g
This matrix features control via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports UART RS232 pass-through.
The PU-4H4HBTPL-4K is designed to be used with the PU-515PL-RXs that is supplied in the kit.
Feature:
HDMI, HDCP1.1 and DVI compliant
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
Supports uncompressed video/audio up to 10.2Gbps
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
Supports 1080p distances up to 60 meters through CAT5e/6/7 cables
Supports 3D signal display dependent upon the output display EDID settings
Supports HDMI input up to 15 meters at 8-bit resolution or 10 meters at 12-bit resolution
Supports bi-directional IR from input and output locations
Supports RS-232, remote control, on-panel control and IP Control (Telnet & Web GUI)
1U size design
Supports external and internal EDID settings
Supports RS-232 for Matrix Control, plus RS-232 pass-through: Third-party devices can be controlled in each zone via RS-232 from the head-end to the receiver, or head-end devices can be controlled via RS-232 from any receiver in any zone
Supports 4K/2K & 4K UHD - CAT5e/6 = 35m & CAT6a/7 = 40m
Specification:
Inputs:
4x HDMI [4x HDMI Uncompressed AV and Data]
5x 3.5mm Stereo mini-jack [5x Infra Red Receiver]
1x RJ45 [1x LAN Serving / IP Control]
1x 9pin Dsub [1x RS-232 Data]
1x USB Mini B [1x Service Port Propriety Data]
Outputs:
4x RJ45 [4x HDBaseT Lite HDMI & Propriety Data]
5x 3.5mm Stereo mini-jack [5x Infra Red Emitter]
PSU: 24V/3.75A
Dimensions: 440mm [W] x 250mm [D] x 45mm [H]
Net Weight: 3340g
Gross Weight:5660g