PU-8H8HBTPL-4K
CYP/// PU-8H8HBTPL-4K är det självklara valet i ett fullfjädrat multiroom-system baserat på HDMI om man vill ha 4K stöd.
Den är HDBaseT Lite vilket innebär att den hamnar i ett attraktivt prisläge, men klarar ändå 60 meters räckvidd i en vanlig Cat6-kabel.
8 HDMI in och 8 HDBaseT Lite ut gör att du klarar även en större bostad 8 rum räcker i de flesta fall.
En annan fördel med denna matrisen är att den levererar Power over Cable ( PoC ) vilket innebär att man inte behöver strömförsörja mottagarna utan allt detta sköts genom matrisen.
The 4K2K 8 by 8 HDMI Matrix over CAT5e/6/7 supports the transmission of video (resolutions up to 4K2K Full HD), multi-channel digital audio from 8 HDMI sources to 8 outputs over a single CAT5e/6/7 cable (up to 60m) for each output. It supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3D TV and 3D source.
This matrix features control via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports UART RS232 pass-through and CEC control function of both sources and screens using Telnet, Web GUI or RS232.
The PU-8H8HBTPL-4K is designed to be used with PU-515PL-RX.
HDMI, HDCP 1.1 and DVI compliant
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
Supports uncompressed video/audio up to 10.2Gbps
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
Supports 1080p distances up to 60 meters through CAT6/7 cables
Supports 3D signal display dependent upon the output display EDID settings
Supports PoC (Power over Cable) on compatible receivers only
Supports HDMI input up to 15 meters at 8-bit resolution or 10 meters at 12-bit resolution
Supports bi-directional IR from input and output locations
Supports RS-232, remote control, on-panel control and IP Control (Telnet & Web GUI)
2U size design
Supports external and internal EDID settings
Supports RS-232 for Matrix Control, plus RS-232 pass-through: Third-party devices can be controlled in each zone via RS-232 from the head-end to the receiver, or head-end devices can be controlled via RS-232 from any receiver in any zone
Supports CEC control function of both sources and screens using Telnet, Web GUI or RS232
Inputs:
8x HDMI [8x HDMI Uncompressed AV and Data]
9x 3.5mm Stereo mini-jack [9x Infra Red Receiver]
1x RJ45 [1x LAN Serving / IP Control]
1x 9pin Dsub [1x RS-232 Data]
1x USB Mini B [1x Service Port Propriety Data]
Outputs:
8x RJ45 [8x HDBaseT Lite HDMI & Propriety Data]
9x 3.5mm Stereo mini-jack [9x Infra Red Emitter]
PSU: 24V/6.25A
Dimensions: 440mm [W] x 265mm [D] x 90mm [H]
Net Weight: 4520g
Gross Weight:7360g
This matrix features control via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports UART RS232 pass-through and CEC control function of both sources and screens using Telnet, Web GUI or RS232.
The PU-8H8HBTPL-4K is designed to be used with PU-515PL-RX.
Feature:
HDMI, HDCP 1.1 and DVI compliant
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
Supports uncompressed video/audio up to 10.2Gbps
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
Supports 1080p distances up to 60 meters through CAT6/7 cables
Supports 3D signal display dependent upon the output display EDID settings
Supports PoC (Power over Cable) on compatible receivers only
Supports HDMI input up to 15 meters at 8-bit resolution or 10 meters at 12-bit resolution
Supports bi-directional IR from input and output locations
Supports RS-232, remote control, on-panel control and IP Control (Telnet & Web GUI)
2U size design
Supports external and internal EDID settings
Supports RS-232 for Matrix Control, plus RS-232 pass-through: Third-party devices can be controlled in each zone via RS-232 from the head-end to the receiver, or head-end devices can be controlled via RS-232 from any receiver in any zone
Supports CEC control function of both sources and screens using Telnet, Web GUI or RS232
Specification:
Inputs:
8x HDMI [8x HDMI Uncompressed AV and Data]
9x 3.5mm Stereo mini-jack [9x Infra Red Receiver]
1x RJ45 [1x LAN Serving / IP Control]
1x 9pin Dsub [1x RS-232 Data]
1x USB Mini B [1x Service Port Propriety Data]
Outputs:
8x RJ45 [8x HDBaseT Lite HDMI & Propriety Data]
9x 3.5mm Stereo mini-jack [9x Infra Red Emitter]
PSU: 24V/6.25A
Dimensions: 440mm [W] x 265mm [D] x 90mm [H]
Net Weight: 4520g
Gross Weight:7360g