500753
Här har vi ett HDMI och RS232 över IP kit, med hjälp av detta kit samt bra kablar kan man skicka en HDMI och RS232 signal som sänds över ett befintligt IP nätverk.
Den stora fördelen med att använda sig av det befintliga nätverket är naturligtvis att man slipper dra nya kablar vilket både kan vara dyrt och besvärligt.
Kompatibelt med utvalda ethernet switchar ( se längre ner )
The HDMI / RS232 over IP Extender Kit with PoE allows HDMI equipment to be connected up to 330 feet ( 100m ) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several encoders and decoders to the same Ethernet network.
The Encoder (500753-TX) and Decoder (500753-RX) also support PoE (PD) if used with a PoE Ethernet Switch.
The kit comes with one (1) Encoder and one (1) Decoder as well as an IR Emitter and IR Sensor for remote control applications.
For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet switch must have Gigabit ports, DHCP Server capability and IGMP communications protocol. We recommend using the Cisco SG300 Series Managed Switches.
A MuxLab Management Software is available to simplify the configuration and utilization of the 500753.
CLICK HERE to learn about our HDMI Over IP Software
Applications: Commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, and medical information systems.
MuxLab sells pre-configured Cisco Switches for our video over IP solutions.
Switches available:
• Cisco SG300-10P 10-Port Gigabit PoE Managed Switch (model 500995)
Click for details
• Cisco SG300-28P 28-Port Gigabit PoE Managed Switch (model 500996)
Click for details
Features
Extends 1080p HDMI signals up to 330 feet ( 100 meter )
Supports PoE
Up to 390 feet ( 120 meter ) between the TX and RX when no LAN switches is used.
Supports up to 16 transmitters and 200 recievers
Supports multicasting and broadcasting
IR Control, HDCP compliant
Control via Windows-based software or via any web device ( mobile / tablet ) with use of model 500810 ( Pro Digital Network Controller )
The Encoder (500753-TX) and Decoder (500753-RX) also support PoE (PD) if used with a PoE Ethernet Switch.
The kit comes with one (1) Encoder and one (1) Decoder as well as an IR Emitter and IR Sensor for remote control applications.
For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet switch must have Gigabit ports, DHCP Server capability and IGMP communications protocol. We recommend using the Cisco SG300 Series Managed Switches.
A MuxLab Management Software is available to simplify the configuration and utilization of the 500753.
CLICK HERE to learn about our HDMI Over IP Software
Applications: Commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, and medical information systems.
MuxLab sells pre-configured Cisco Switches for our video over IP solutions.
Switches available:
• Cisco SG300-10P 10-Port Gigabit PoE Managed Switch (model 500995)
Click for details
• Cisco SG300-28P 28-Port Gigabit PoE Managed Switch (model 500996)
Click for details
Features
Extends 1080p HDMI signals up to 330 feet ( 100 meter )
Supports PoE
Up to 390 feet ( 120 meter ) between the TX and RX when no LAN switches is used.
Supports up to 16 transmitters and 200 recievers
Supports multicasting and broadcasting
IR Control, HDCP compliant
Control via Windows-based software or via any web device ( mobile / tablet ) with use of model 500810 ( Pro Digital Network Controller )
De här produkterna kan (och är avsedda) att strömförsörjas med PoE, alltså ström via nätverkskabeln från en switch med PoE. Om du inte har PoE-switchar kan man köpa till nätadapters för att strömförsörja dem med.
Nätadapters och IR-kablar på bilden är tillbehör och köpes separat.
