Gefen Thoolbox Extra long extender är en förlängare för HDMI över nätverkskabel baserad på HDBaseT. Den kan skicka HDMI och lite annat upp till 100m genom en vanlig nätverkskabel.
Extra Long Range Extender for HDMI, 3D TV and IR over one CAT-5* cable
The GefenToolBox Extender for HDMI 3DTV extends HDMI including multi-channel digital audio at resolutions of up to 1080p60 Full HD up to 330 feet (100 meters) away from any Hi Def source using one CAT-5* cable for the extension. This product also provides an IR back channel to control AV sources using the same CAT-5 cable extension. Using this channel with the built-in IR "eye" on the receiver, or an optional RMT IR Extender, simply point an IR remote(s) of the A/V device towards the display to control Hi-Def sources as if they were located in the same room or proximity to the display.
How It Works
Locate the GefenToolBox Extender for HDMI 3DTV Sender unit next to a set-top box or Blu-ray player source. Use the HDMI cable supplied to connect the TV source to the Sender unit. The Receiver unit is located close to the display which can be up to 330 feet (100 meters) away from the Sender unit. The 3D TV display plugs into the back of the Receiver unit. For IR extension, either the Receiver should be located so the internal IR "eye" can see the IR signals at the display location, or an external Gefen EXT-RMT-EXTIR IR Extender may be plugged into the Receiver and located near the display. Connect a Gefen EXT-2IREMIT IR Blaster to the Sender and locate the blasters near the source equipment. Only one CAT-5 cable connects the Sender and the Receiver units to each other. Multi-channel digital audio is embedded into the HDMI signal (Dolby True HD / DTS Master Audio).
Supported HDMI Features:
-1080p Full HD
-Deep Color
-x.v.Color
-LCPM7.1 Audio
-Dolby TrueHD and DTS-HD Master Audio
-3DTV Pass-Through
-CEC Pass-Through
-Lip-Sync Pass Through
Note: These units are also available in white (please see the Related Products link in the sidebar to the left).
* Shielded (STP) CAT-5 or CAT-6 is recommended. However, unshielded (UTP) CAT-5 or CAT-6 is acceptable.
This product does not support HDCP content when connected to a DVI source or display.
The GefenToolBox Extender for HDMI 3DTV extends HDMI including multi-channel digital audio at resolutions of up to 1080p60 Full HD up to 330 feet (100 meters) away from any Hi Def source using one CAT-5* cable for the extension. This product also provides an IR back channel to control AV sources using the same CAT-5 cable extension. Using this channel with the built-in IR "eye" on the receiver, or an optional RMT IR Extender, simply point an IR remote(s) of the A/V device towards the display to control Hi-Def sources as if they were located in the same room or proximity to the display.
How It Works
Locate the GefenToolBox Extender for HDMI 3DTV Sender unit next to a set-top box or Blu-ray player source. Use the HDMI cable supplied to connect the TV source to the Sender unit. The Receiver unit is located close to the display which can be up to 330 feet (100 meters) away from the Sender unit. The 3D TV display plugs into the back of the Receiver unit. For IR extension, either the Receiver should be located so the internal IR "eye" can see the IR signals at the display location, or an external Gefen EXT-RMT-EXTIR IR Extender may be plugged into the Receiver and located near the display. Connect a Gefen EXT-2IREMIT IR Blaster to the Sender and locate the blasters near the source equipment. Only one CAT-5 cable connects the Sender and the Receiver units to each other. Multi-channel digital audio is embedded into the HDMI signal (Dolby True HD / DTS Master Audio).
Supported HDMI Features:
-1080p Full HD
-Deep Color
-x.v.Color
-LCPM7.1 Audio
-Dolby TrueHD and DTS-HD Master Audio
-3DTV Pass-Through
-CEC Pass-Through
-Lip-Sync Pass Through
Note: These units are also available in white (please see the Related Products link in the sidebar to the left).
* Shielded (STP) CAT-5 or CAT-6 is recommended. However, unshielded (UTP) CAT-5 or CAT-6 is acceptable.
This product does not support HDCP content when connected to a DVI source or display.
