CYP/// HDMI över HDBaseT 2.0 4K UHD mottagare USB/ UHD+/ LAN

15 750 kr

 

PUV-2600RX

The PUV-2600RX HDBaseT 2.0 receiver is designed for use in environments that require a wide range of flexibility when it comes to inputs, outputs, and control. With a 2 by 2 matrix arrangement of HDBaseT & HDMI inputs and dual HDMI outputs this Receiver can handle a variety of source routing scenarios. The HDMI input and outputs support resolutions up to a maximum of 4K@60Hz (4:4:4, 8-bit) while the HDBaseT input supports resolutions up to a maximum of 4K@60Hz (YUV 4:2:0, 8-bit). A balanced analogue stereo audio breakout is also provided (LPCM 2.0 sources only) allowing audio from the receiver to be integrated with local amplifeir or active speakers. The HDBaseT input not only supports video and audio but also bidirectional Ethernet, RS-232, USB, and IR.

When paired with the EL-2600V (Not Included), up to 3 switchable USB 2.0 host (Type-B) connections are available (2 on the Transmitter, 1 on the Receiver) which connect to up to 6 USB 2.0 (Type-A) device ports (3 on the Transmitter, 3 on the Receiver) for a multi-source, bidirectional, and highly flexible KVM or interactive display configuration (Note: Only 1 USB host may be active at a time).

The PUV-2600RX can provide 48V PoH (Power over HDBaseT) power to the connected HDBaseT Transmitter (compatible Transmitters only), allowing for greater flexibility within different installation scenarios. This unit is controllable via front-panel controls, WebGUI, Telnet, and RS-232.

Features

  • HDMI with 18Gbps (600MHz), 3D & 4K video support; HDBaseT 2.0 compatible
  • HDCP 1.x & 2.2 compliant
  • Selectable HDMI and HDBaseT inputs
  • HDMI input supports resolutions up to 4K@60Hz (4:4:4, 8-bit)
  • HDBaseT input supports resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit)
  • HDMI output supports resolutions up to 4K@60Hz (4:4:4, 8-bit)
  • 2×2 matrix switching (both HDMI outputs are independent)
  • Supported HDBaseT features: HD video and audio, 100BaseT Ethernet, 48V PoH, and control (bidirectional IR/RS-232/USB pass-through)
  • Supports pass-through of LPCM 2.0/5.1/7.1, Bitstream & HD Bitstream audio formats
  • Balanced analog stereo audio breakout
  • Flexible USB host selection using front panel buttons
  • Multiple USB hosts may be connected at once (up to 3 total, between the Tx and a compatible Rx unit) with a single selected host active at a time
  • Supports 48V PoH from Receiver (PSE) to Transmitter (PD) (compatible Transmitters only)
  • Controllable via front panel buttons, WebGUI, Telnet, and RS-232


Specification

Inputs
1x HDMI [1x HDMI Uncompressed AV and Data]
1x RJ45 [1x HDBaseT2 HDMI & Propriety Data]
1x RJ45 [1x LAN Serving]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x USB Type B [1x Propriety Data]
1x 3.5mm Stereo mini-jack [1x RS-232]

Outputs
2x HDMI [2x HDMI Uncompressed AV and Data]
1x Phoenix (5 pin) [1x Analogue Stereo (Balanced or Unbalanced)]
11x Phoenix (3 pin) [11x RS-232]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
3x USB Type A [3x Propriety Data]


PSU:
24V/3.75A
Dimensions
158mm [W] x 231mm [D] x 44mm [H]
Net Weight
915g
Gross Weight
1400g